RC Robot with Camera to inspect dangerous sites.

Robot parameters:

Mobile phone: Android5.0 or above, screen resolution of 1080P or above (currently mainstream mobile phone basically reach, temporarily do not support s).

Communication mode: Connect the same router or robot to the hot spot of the phone (the phone should have Bluetooth function at the same time)

Three modes control Communication distance:

1. The hotspot mode depends on the WiFi power of the mobile phone, and the non-blocking router mode depends on WiFi about 30-50m.

2. The APP control depends on the WiFi power of the mobile phone, and in the case of no obstruction and bad environment，APP control distance about 5-30m.

3. The Wifi handle control depends on the WiFi power of the wifi handle, and in the case of no obstruction and bad environment，The Wifi handle control distance about 5-10m.

Coverage area: in the office building with good coverage, distance can be ignored if the network is unobstructed.

Battery and endurance: the battery is 3.7V lithium battery, the capacity is 200mAH, a charge continuous use time of about half an hour

Driving speed: 5cm per second (adjustable)

Light brightness: stepless adjustable.

Body material: plastic, 3D Printing ,metal, PCB

Exterior dimensions: Length*width*height=90mm*50mm*40mm

Accessories: robot + data cable + charging & communication board + packaging box.

Now is the improved version: https://www.bilibili.com/video/BV1h5411J7D6

APP version robot does not provide mobile phone and robot source code, but to learn can refer to (source code and circuit) :

1. The reconnaissance robot with ESP remote controller: https://www.bilibili.com/video/BV1Ri4y1K7biCode in tencent micro cloud: https://share.weiyun.com/cMToBvdC

2. The computer graph Python + ESP32 preach: https://www.bilibili.com/video/BV1da4y1W7dn

Code in tencent micro cloud: https://share.weiyun.com/MKKfBhrD

Note: Batteries are included! Already installed!

Information download:

1. Tencent micro cloud: link: https://share.weiyun.com/lEpyXJ75 password: ch6a7q

2. Gitee website:https://gitee.com/the-story-of-technology-house/esp32-mini-reconnaissance-car

Technical documents as follow, the most complete development and design, you deserve to own this engineering project, we do technology first, service first, not just sell goods.

If you need this manual of robotic car routines and development documentation, such as ESP32 and APP open source code, We have APP, driver, firmware, circuit diagram, installation instructions, video tutorials and so on.Please contact us and leave your email.

Note: The product has been installed, the product has been upgraded to use black track to increase the product appearance! Need information to contact customer service, leave an accurate available email address!

Note:

1. Samsung mobile phone may not be compatible with our Android APP, if the

mobile phone finds this WIFI, please change to a mobile phone that is not a

Samsung brand.

.

2. It is recommended that you buy this new handle and smart car to use, with 4.3

inch large screen, touch screen, can read back the sound back, the connection

operation is very simple.